PICASSO PROFI - 05

PICASSO PROFI 05 is an emulsion paint of excellent quality for interior use. It shows great hiding power and whiteness as well. It has very good working and leveling properties, quick drying and it gives a nice mat finish. It is applied on interior surfaces of plaster, concrete, brick, wood, stucco, gypsum board, plastic etc. It is a really economic solution for the professionals and suitable for places where frequent painting and freshening up is needed. Type : Emulsion paint based on special acrylic copolymers. Application method : Brush, roller or airless spray. Thinning : 5-10% v/v with water. Spreading rates : 9.5±1 m²/Lt for complete hiding (2 coats). Drying times : Touch dry after 25-40 minutes and recoatable after 1-3 hours. Drying and recoating time may be prolonged under conditions of low temperature and high relative humidity. Colours : Available in white and in thousands of shades via the DEUTSCH COLOR SYSTEM. It can also be tinted with DEUTSCH COLOR Basic Emulsion Colorants. . Storage : Store between 5ºC to 30ºC.

PICASSO PROFI 05 belongs to the category Α/a WB (interior matt walls and ceilings). EU Limit Value: 75g/l (2007) and 30g/l (2010). The product contains max. 29g/l.
Surfaces must be clean, dry and free from all defective and poorly adhering material, dirt, grease and salts. Use DEUTSCH COLOR putty Spachtel Finish or/ and Spachtel Füllen Elastisch to fill, where ever is necessary. Sound surfaces without coherence problems can be primed with Macht haftgrund Innen primer thinned 300-400% with clean water. On very porous surfaces or surfaces already coated with lime or low quality chalky paints prime with Macht Tiefgrund Wasser primer. Then apply PICASSO PROFI 05. PICASSO PROFI 05 is applied in 2 coats. For the refinishing of sound surfaces apply directly 2 coats of PICASSO PROFI 05.
Keep out of reach of children. If swallowed seek medical advise immediately and show this container. Do not empty into drains.
Surfaces painted with emulsion paint PICASSO PROFI 05 can be washed gently, using a sponge with water or soap solution, after at least 20-30 days. Stir well before use. Protect from frost and do not apply in temperatures below 5 C. Clean tools with water and soap solution after use.