HOLZ VORLACK 180

Holz Vorlack 180 is a sealing undercoat for enamel paints suitable for interior and exterior wooden surfaces and walls. It has very good whiteness, hiding power, levelling, working properties and very easy sanding. Type : Alkyd based undercoat for enamel paint. Lead and chromates free. Application method : Brush, roller, spray gun. Thinning : 5-15% v/v with Pinsel Sol TB. Spreading rates : 10-12 m²/lit for each coat on previously prepared surfaces. Drying times : Touch dry after 3 hours and recoatable after 16 hours. Drying time depends on weather conditions (humidity, temperature) Colours : It is available in white. VOC (Volatile Organic Compounds) : Limit value for this product (cat. A/g): 450gr/lt (2007) and 350gr/lt (2010). This product contains max 349gr/lt VOC. Storage : Store between 5ºC to 40ºC.

Surfaces must be clean and dry. Remove dust, grease, salts and poorly adhering materials. For wooden surfaces fill with putty where it is necessary and then sand smoothly with a suitable abrasive paper. After the preparation of the surface apply one to two coats of Holz Vorlack 180. When it is completely dry, sand thoroughly with a suitable abrasive paper and then apply the finish coat. Suggested application temperature from 10 ºC up to 35 ºC.
Flammable. Repeated exposure may cause skin dryness or cracking. Harmful to aquatic organisms may cause long term adverse effects in the aquatic environment. - Keep out of the reach of children. Do not breathe fumes. Avoid contact with skin. Do not empty into drains. If swallowed, seek medical advice immediately and show this container or label. Use only in well-ventilated areas. Avoid release to environment. Refer to special instructions/ safety data sheets. Contains ethyl-methyl-ketoxime. May produce an allergic reaction.
Limit value for this product (cat. A/g): 450gr/lt (2007) and 350gr/lt (2010). This product contains max 349gr/lt VOC.