ALPEN PROFI - 32

ALPEN PROFI - 32 is an acrylic paint of excellent quality for exterior use. It shows great hiding power and whiteness as well. It has very good working and leveling properties, quick drying and it gives a nice mat finish. It is applied on interior surfaces of plaster, concrete, brick, wood, stucco, gypsum board, plastic etc. It is a really economic solution for the professionals and suitable for places where frequent painting and freshening up is needed. Type: Emulsion paint based on special acrylic copolymers. Application method: Brush, roller or airless spray. Thinning: 5-10% v/v with water. Spreading rates: 9.5±1 m²/lt for complete hiding (2 coats). Drying times:Touch dry after 25-40 minutes and recoatable after 1-3 hours. Drying and recoating time may be prolonged under conditions of low temperature and high relative humidity. Colours: Available in white and in thousands of shades via the DCS. It can also be tinted with DEUTSCHCOLOR BASIC Emulsion Colorants. Storage:Store between 5ºC to 30ºC.

): ALPEN PROFI - 32 belongs to the category Α/c WB (exterior walls of mineral substrate). EU Limit Value: 75g/l (2007) and 40g/l (2010). The product contains max. 39g/l.
Surfaces must be clean, dry and free from all defective and poorly adhering material, dirt, grease and salts. Prime with Macht Tiefgrund TB primer thinned up to 100% with Pinsel Sol TB. Then apply ALPEN PROFI - 32. ALPEN PROFI - 32 is applied in 2 coats.
Keep out of reach of children. If swallowed seek medical advise immediately and show this container. Do not empty into drains.
Surfaces painted with acrylic paint ALPEN PROFI - 32 can be washed gently, using a sponge with water or soap solution, after at least 20-30 days. Stir well before use. Protect from frost and do not apply in temperatures below 5°C. Clean tools with water and soap solution after use.